English (GB)
13
6.3.2 PWM input signal profile A (heating)
The pump runs on constant-speed curves depending on the PWM
input signal. The speed decreases when the PWM value
increases. If the PWM signal equals zero (0 VDC), the pump will
switch to the control mode selected before connecting to a PWM
signal.
Fig. 17
PWM input signal profile A (heating)
6.3.3 PWM feedback signal
The PWM feedback signal offers pump information like in bus
systems:
• current power consumption (accuracy ± 2 % of PWM signal)
• warning
• alarm.
Alarms
Alarm output signals are available because some PWM output
signals are dedicated to alarm information. If a supply voltage is
measured below the specified supply voltage range, the output
signal is set to 75 %. If the rotor is locked due to deposits in the
hydraulics, the output signal is set to 90 % because this alarm
has a higher priority. See fig.
Fig. 18
PWM feedback signal - power consumption
Data
TM0
6
9
13
6 1
6
1
7
PWM input signal [%]
Pump status
≤ 10
Maximum speed: max.
> 10 /
≤
84
Variable speed: min. to max.
> 84 /
≤
91
Minimum speed: IN
> 91/95
Hysteresis area: on/off
> 95 or
≤
100
Standby mode: off
TM0
7
1
31
3 1
11
8
PWM input signal [%]
Max.
Speed
PWM input signal
Max.
Sp
e
e
d
25
50
100
150
200
250
10
20
30
40
50
60
70
80
90
100
Power [W]
Standby (stop)
Alarm stop: fault, blocked pump
Alarm stop: electrical fault
Warning
Saturation at 70 Watt
S
lo
pe
: 1
W
/
%
P
W
M
Maximum rating
Symbol
Value
PWM frequency input with high-speed
optocoupler
f
100-4000 Hz
Guaranteed standby power
consumption
< 1 W
Rated input voltage - high level
U
iH
4-24 V
Rated input voltage - low level
U
iL
< 1 V
High-level input current
I
iH
< 10 mA
Input duty cycle
PWM
0-100 %
PWM frequency output, open collector
f
75 Hz ± 5 %
Accuracy of output signal regarding
power consumption
-
± 2 % (of
PWM signal)
Output duty cycle
PWM
0-100 %
Collector emitter breakdown voltage
on output transistor
U
c
< 70 V
Collector current on output transistor
I
c
< 50 mA
Maximum power dissipation on output
resistor
P
R
125 mW
Zener diode working voltage
U
z
36 V
Maximum power dissipation in Zener
diode
P
z
300 mW
