Product description
12 | 40
B
A
_
T
D3
-A
F
0
0
1
e
n
_
0
0
4
_
F
e
inf
ilte
r-
F
M
.d
o
cx
3.4
Functional description
The unfiltered drinking water flows into the filter from the inlet side and then passes through
the filter elements to the pure water outlet.
In the course of this process, foreign particles > 80 µm in size (standard) for FM 150,
> 50 µm (standard) for FM 200 and > 500 µm for FM-KW are retained.
Depending on their size and weight, the foreign particles either stick to the filter element or
fall straight down where they accumulate at the lowest point of the filter.
Due to the growing load of the filter elements, the differential pressure between the raw
water inlet and the pure water outlet increases.
If the differential pressure of 0.8 bar at the flow rate of the filter is exceeded, the filter
elements must be replaced.
3.5
Accessories
You can retrofit your product with additional accessories. Please contact your local
Grünbeck representative or Grünbeck’s headquarters in Hoechstaedt for more details
(refer to www.gruenbeck.com).
Designation
Order no.
Order no.
DN 150
DN 200
5 µm filter element
103 083
100 µm filter element
103 110
103 150
Quantity
2
14
Illustration
Product
Order no.
Differential pressure switch
With electric contactor, continuously adjustable for visual or acoustic
remote signal.
102 870
Hose extension kit for differential pressure switch
102 850
Parallel piping of two GENO-fine filters
Subject to project
Summary of Contents for GENO-fine FM 150
