Start-up
26 | 68
B
A
_
TD
3
-CK0
0
0
e
n
_
0
2
4
_
e
x
a
liQ.
d
o
cx
5
Start-up
Starting up a dosing system represents a major intervention into the drinking water system
and only a specialist installer should install these systems.
5.1
Preparations
5.1.1
Opening the door
1.
Press the release button firmly until the door pops open.
2.
Swivel the door open.
5.1.2
Connect dosing line
NOTE:
Incorrect installation of the dosing line over hot/sharp-edged surfaces.
● Functional failure or dosing capacity is reduced.
► Guide the dosing line to the dosing valve without tension or kinking.
► Leave a reserve length when shortening the dosing line.
► Lay the dosing line protected from hot and sharp-edged surfaces.
