Grow GM73, User Manual

Page: 16 / 79

www.hzgrow.com 9
Stable Induction Time
4.3.2 Sensitivity Rating Setting
There are three levels of sensitivity to choose from, default: high sensitivity.
*High Sensitivity Medium Sensitivity Low Sensitivity
4.4 Host Mode
Through the instruction to trigger the reading engine, and it can end the reading by instruction, read
successfully or the reading time exceeds the single reading time,the reading will be finished.
Host Mode
4.5 Single Scan Time
This parameter is the duration of a single decoding. Time from 0.5s to 25.5s, step size 0.1s. Default
3s. Example:
Set 0.5s, first scan the bar code below. Then scan the “0”,“0” and “5” bar code in the Digital Setting
Code (Appendix 1).
Set 10.5s, first scan the bar code below. Then scan the “1”,“0” and “5” bar code in the Digital Setting
Code (Appendix 1).
Single scan time