© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Basic Installation/Operation
70421501 (EN)
24
Control Instructions
Dual Digital Timer Control
RQ Control Suffix
1. Select HIGH, MED, LOW or NO HEAT by
turning the temperature knob.
2. Set the HEAT TIME for the number of minutes
(from 0-60) desired.
3. Set the COOL DOWN TIME for the number of
minutes (from 0-15) desired.
4. Select reversing or nonreversing cylinder rotation
settings, if applicable.
5. Press and release START button to start tumble
dryer. Display will show minutes remaining
before end of cycle.
IMPORTANT: To stop the tumble dryer at any
time during the cycle, OPEN DOOR. If the loading
door or lint panel door is opened during the cycle,
the heating system will shut off and the motor will
stop. To restart the cycle, both doors must be closed
and the START button must be pressed in.
6. When the cycle is complete, open door and
remove the laundry.
TMB2147N
Figure 6
TMB2148N
Figure 7
TMB2149N
Figure 8
TMB2145N
Figure 9
TMB2150N
Figure 10
www.groupdynamics-laundry.com
