Gröne GTTS 15-1000, Diagnostics And Troubleshooting Manual

Page: 20 / 112

20
REPAIR:
All repairs of the power tools should be performed by a qualified repair person only! Repairs as a part
of warranty should only be commissioned to an authorised service provider or to a manufacturer direct-
ly. In case of damage to the power cord it must be replaced with a new cord. Any modification
to the machine can be done only by the Gröne warranty service.
If there is a need for repair of the power tool, please contact:
KAEM Sp. z o.o. Sp. k.
ul. Rzemieślnicza 14, 62-081 Baranowo k. Poznania
serwis@kaem.pl
serwis@grone.pl
tel.: +48 61 816 30 84
fax: +48 61 816 30 50
The list of replacement parts and technical schemes are available at customer’s request via e-mail or fax
sent at addresses and fax numbers indicated above.
ENVIRONMENTAL PROTECTION:
The dust generated while sanding can contain harmful substances – it should be disposed properly.
Please observe the country-specific regulations regarding disposal and recycling of waste machines,
packaging and accessories.
Applicable to the EU countries only: do not dispose of the power tools with the household waste! Ac-
cording to the 2002/96/WE European directive on waste electrical and electronic equipment and its
implementation in the national legislation, the waste power tools must be collected separately
and must be subject to secondary material recovery in compliance with the provisions on the environ-
mental protection.
DISCLAIMER OF LIABILITY:
KAEM Sp. z o.o. Sp. k. is not responsible for any damages nor lost profits caused by interruption of busi-
ness, which was caused by our product or the inability to use it.
KAEM Sp. z o.o. Sp. k. and its representatives are not responsible for damages caused by unintended
use of the tool or as a result of use in conjunction with products of other manufacturers.