24
To replace individual milling cutters:
1.
Remove the milling head by following the instructions above
2.
Remove the aforementioned shoulder screw so that it is possible to take off the outer retaining
ring
3.
When the milling head is removed from the spindle, the milling cutters can be disassembled.
To do so, remove bearing bolt that goes through the inner and outer fl anges. The milling cut-
ters are mounted on this bolt.
4.
When the bolt is removed, it is easy to take out the milling cutter from the head.
5.
Follow the instruction in the reverse order when the milling cutters are replaced.
LOOSENING SPINDLE SCREW
INNER SHOULDER SCREWS OF THE RETAINING RING
SPINDLE SCREW
AND WASHER
INNER RETAINING RING
MILLING WHEEL
BEARING SCREW
MILLING HEAD
SPINDLE SCREW
AND WASHER
INNER RETAINING RING
INNER SHOULDER
SCREWS OF THE RETA-
INING RING
Frezarka_do_betonu_Full_v05_HR.indd 24
Frezarka_do_betonu_Full_v05_HR.indd 24
2016-10-25 21:46:16
2016-10-25 21:46:16
