This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Figure 4. Box inventory.
-14-
Model T33300 (Mfd. Since 04/22)
Inventory
Box (Figure 4) Qty
A. Model T33300 Track Saw .......................... 1
B. Hex Wrench 5mm ....................................... 1
C. Blade 48T ................................................... 1
The following items are needed, but not included,
for the setup/assembly of this tool.
Description Qty
•
Safety Glasses ........................................... 1
•
Dust Collection System .............................. 1
•
Dust Hose 1
1
⁄
2
" ........................................... 1
•
Hose Clamps 1
1
⁄
2
" ...................................... 2
Needed for Setup
Unpacking
SECTION 3: SETUP
B
C
A
Summary of Contents for T33300
Page 36: ......
