COPYRIGHT © MAY, 2021 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 05/21) #CS21852 PRINTED IN CHINA
V1.05.21
Introduction
The T32715 Tube Bender Set is designed to bend
most common tube sizes on a safe centerline
radius. The set comes with
3
⁄
8
",
1
⁄
2
",
9
⁄
16
",
5
⁄
8
",
3
⁄
4
",
and
7
⁄
8
" round dies, as well as
3
⁄
4
" and 1" square
dies.
Specifications
•
Round Tube Capacity ........................
3
⁄
8
"–
7
⁄
8
"
•
Square Tube Capacity .........................
3
⁄
4
"–1"
•
Maximum Bending Angle ...................... 180°
•
Maximum Bending Capacity .........18 Gauge
•
Weight ................................................58 lbs.
For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T32715
TUBE BENDER SET
INSTRUCTIONS
Needed for Setup
•
Safety Glasses ......................................1 Pr.
•
Cleaner/Degreaser ..................... As Needed
•
Disposable Shop Rags ............... As Needed
•
Disposable Gloves ..................... As Needed
•
Mounting Hardware .................... As Needed
•
Open-End Wrench or Socket 22mm .......... 1
•
Hex Wrench 3mm ....................................... 1
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Eye injury hazard! Always
wear safety glasses when
using this machine.
Figure 1. Model T32715 Tube Bender Set.
Summary of Contents for T32715
Page 8: ......
