For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T27948
2-DOOR TOOL CABINET
INSTRUCTIONS
COPYRIGHT © MARCH, 2017 BY GRIZZLY INDUSTRIAL, INC., REVISED JULY, 2017 (MN)
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 10.16) #JH18539 PRINTED IN CHINA
Inventory
Qty
• Tool Cabinet with Shelves ........................... 1
• Cabinet Feet ................................................ 4
• Keys ............................................................. 2
Figure 1. Model T27948.
• To reduce risk of crushing injuries from
tool cabinet tipping over on you:
— Do not stand on cabinet.
— Only move or transport cabinet with all
doors closed and locked.
— Push cabinet only (do not pull it) when
moving.
• Do not exceed weight capacities:
—
Max individual shelf weight limit
is 325 lbs.
— Max total tool cabinet weight limit
(including contents) is 650 lbs.
• To prevent accidental tipping, ensure
adjustable feet are down and cabinet
body is level.
• Do not allow children to have unsupervised
access to cabinet.
V1.07.17
Introduction
The Model T27948 2-Door Tool Cabinet requires
some assembly. Follow the instructions below for
assembly, operation, and maintenance.
Assembly
The Model T27948 comes with four adjustable
feet for leveling the cabinet.
To install feet:
1. With help from another person, lay cabinet
upside down on floor (see
Figure 2).
Note: We recommend sweeping the floor
clean and laying down a piece of cardboard
or a blanket to prevent scratching the finish
during this step.
2. Install one adjustable foot in each corner (see
Figure 2).
3. To prevent tipping or rocking, level the cabi-
net body by rotating the cabinet feet up or
down as needed.
Figure 2. Location of adjustable feet.
Adjustable Feet
Summary of Contents for T27948
Page 4: ......
