For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T26903
52
1
⁄
2
" 14-DRAWER TOOL CABINET
INSTRUCTIONS
COPYRIGHT © AUGUST, 2014 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
FOR MODELS MANUFACTURED SINCE 08/2014 #WK16750 PRINTED IN CHINA
Introduction
The Model T26903 14-Drawer Tool Cabinet
requires some assembly. Follow instructions
below for assembly, operation, and maintenance.
Inventory
Qty
• Tool Cabinet with Drawers ........................... 1
• Handle ......................................................... 1
• Hex Bolts M8-1.25 x 25 ............................. 28
• Flat Washers 8mm .................................... 24
• Lock Washers 8mm ................................... 24
• Fixed Casters .............................................. 2
• Swivel Casters ............................................. 2
• Swivel Casters with Brakes ......................... 2
• Keys ............................................................. 2
Figure 1. Model T26903.
Assembly
1. Attach handle on preferred side of tool cabi-
net using four M8-1.25 x 25 hex bolts (see
Figure 2). Do not over-tighten!
Figure 2. Handle installed.
Handle
x 4
• To reduce risk of crushing injuries from
tool cabinet tipping over on you:
— Do not stand on cabinet or in drawers.
— Push cabinet only. Do not pull it.
— Only open one drawer at a time.
— Only move or transport cabinet with all
drawers closed and locked.
• Do not exceed weight capacities:
— Max individual drawer weight limit
is 50 lbs.
— Max tool cabinet weight limit (including
contents) is 1000 lbs.
• To prevent accidental rolling, always lock
brakes after moving cabinet.
• Do not allow children to have unsupervised
access to cabinet.
V1.08.14
Summary of Contents for T26903
Page 4: ......
