For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T1213
RESAW DRIFT BAR
INSTRUCTIONS
COPYRIGHT © AUGUST, 2017 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#ES19023 PRINTED IN TAIWAN
Introduction
The Model T1213 Resaw Drift Bar is designed
to help reduce blade lead (cut drift) by creating
a pivot point on the resaw fence that provides
more control during resaw operations. It can be
installed on any resaw fence at least 5
7
⁄
8
" tall.
V1.10.17
Specifications
Weight .........................................................2 lbs.
Dimensions ......................................6
1
⁄
4
"L x 1
1
⁄
4
"D
Minimum Fence Height .................................5
7
⁄
8
"
NOTICE
Installation of Model T1213 requires per-
manent modification of your resaw fence!
Before installing Model T1213, make sure
blade guides clear the top of resaw fence
by at least
1
⁄
2
".
Figure 1. Model T1213 Resaw Drift Bar.
Installation
1. DISCONNECT MACHINE FROM POWER!
2. Install a blade suitable for resaw operations.
We suggest widest possible blade for your
machine with 2–4 TPI (hook or skip teeth)
that is sharp and clean.
3. Install resaw fence and move it up to blade.
If resaw fence is adjustable forward/back,
make sure blade is centered lengthwise on
resaw fence.
4. Mark top of resaw fence exactly
1
⁄
4
" forward of
blade teeth (see
Figure 2).
5. Mark a point exactly
13
⁄
16
" below mark made in
Step 4 (see Figure 2).
Figure 2. Location of center mark and hole point.
Drill
Here
Blade
Resaw
Fence
13
⁄
16
"
1
⁄
4
"
Center
Mark
Recommended Tools
Drill w/Guide or Drill Press ................................ 1
Drill Bit
3
⁄
8
" ......................................................... 1
Center Punch..................................................... 1
Tape Measure .................................................... 1
