Model T10157 (Mfd. Since 07/19)
-5-
6. Press left drawer panel onto wood dowels to
attach it to front and back door panels (see
Figure 7).
Left Drawer Panel
Figure 7. Left drawer panel attached.
Tip:
Use 90° square to check and adjust
drawer corners before installing screws in
Steps 7
–8.
7. Secure bottom drawer panel to back drawer
panel with (3) #8 x 1
1
⁄
4
" wood screws (see
Figure 8).
Figure 8. Securing bottom drawer panel to back
drawer panel.
8. Secure left and right drawer panels to back
and front drawer panels with (8) #8 x 1
1
⁄
4
"
wood screws (see
Figure 9).
Figure 9. Securing left and right drawer panels
to front and rear drawer panels.
x 3
Figure 10. Upper and lower leg.
x 8
Upper
Leg
Lower
Leg
9. Repeat Steps 1
–8 for second drawer.
10. With assistance from another person, place
workbench top upside down on flat, protected
surface.
11. Slide lower legs into upper legs, then secure
them together with (8)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts
and
5
⁄
16
" flat washers, as shown in
Figure 10.
Note:
Make sure that completed leg assem-
blies are all same length, which will dictate
height of finished workbench (from 32"–39").
x 8
