Introduction
•
230 RPM free speed
•
30 ft/lbs maximum torque
•
90 PSI operating pressure
•
5 CFM average air consumption
•
92 dB(A) sound level
•
1
⁄
4
" Air inlet
•
Forward and reverse
•
Short, ergonomic profile
Inventory
A.
1
⁄
4
" Industrial Air Ratchet ............................. 1
Operation
Install any
1
⁄
4
" drive socket onto your air ratchet.
Choose from clockwise (R) to tighten, or coun-
terclockwise (L) to loosen by turning the direc-
tion control on top of the ratchet. Connect the air
ratchet to your regulated air source.
MODEL H6188
1
⁄
4
" INDUSTRIAL AIR
RATCHET
INSTRUCTION SHEET
Figure 1.
Model H6188
Figure 2.
Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © JUNE, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8324 PRINTED IN TAIWAN
Air ratchet MUST have 3-4 drops of air tool oil
directly dropped into the air fitting before each use
as shown in
Figure 2
.
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
EYE/EAR INJURY HAZARD!
Wear safety glasses and
hearing protection during
use of this tool!
DO NOT EXCEED 120 PSI!
Personal injury could
occur.