Copyright © july, 2008 By grizzly industrial, inC.
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
#Bl10958 printed in China
model h0760
red shelf cart–
3 shelves
instructions
recommended tools
Wrench/socket 10mm ....................................... 1
Wrench/socket 17mm ........................................ 1
standard screwdriver ........................................ 1
assembly
1.
insert the two handles through the holes at
both ends of the top shelf (see
figure 2
).
the Model h0760 is convenient for all around
shop use. this utility cart can tote around tools,
parts or inventory and has a very small foot print.
specifications
Weight .......................................................35 lbs.
load Capacity .........................................220 lbs.
dimensions ....................... 16"W x 29
1
⁄
2
"l x 34"h
top shelf height ...........................................31
1
⁄
4
"
distance Between shelves............................7
1
⁄
2
"
shelf depth ....................................................3
1
⁄
2
"
inventory
(
figure 1
)
a.
top shelf .................................................... 1
b.
Center shelf ............................................... 1
c.
Bottom shelf ............................................... 1
d.
handles ...................................................... 2
e.
swivel Casters ............................................ 2
f.
locking swivel Casters .............................. 2
g.
hardware Bag ............................................ 1
—slotted screws M6-1 x 35..................... 36
—hex nuts M6-1 ...................................... 36
—Flat Washers 6mm ............................... 36
—lock Washers 6mm .............................. 36
figure 1.
h0760 inventory.
C
d
e
F
g
B
a
figure 2.
handles secured to top shelf.
2.
align the mounting holes in the top shelf and
handles, then fasten with (12) M6-1 x 35 slot-
ted screws, flat washers, lock washers, and
hex nuts (see
figure 2
).
position the slotted screws on the shelf exte-
rior and the washers and hex nuts on the
shelf interior. Finger tighten the fasteners for
now.
note:
If a shelf is slightly bent, use a small
screwdriver to align the mounting holes in the
shelf and handle.
top shelf
x 12
handles
