manualshive.com logo in svg

Grizzly G1183, Owner'S Manual

The Cooks Professional G1183 Instruction Manual is an essential accessory for your kitchen. This comprehensive manual provides step-by-step instructions to help you effortlessly master your new kitchen appliance. Downloadable for free from our website, manualshive.com, get the most out of your Cooks Professional G1183 with this convenient user manual.

Share
Download
background image

-4-

model g1183/g1276 (mfg. since 3/10)

The information contained herein is deemed accurate as of 4/26/2011 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G1183

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G1183 COMBINATION SANDER 6" X 48" BELT 12"

DISC 3450 RPM

Product Dimensions:

Weight.............................................................................................................................................................. 144 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................ 32-1/2 x 16-1/2 x 29-1/2 in.

Footprint (Length x Width)..................................................................................................................... 16-1/2 x 14 in.

Shipping Dimensions:

Type............................................................................................................................................................. Cardboard

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 148 lbs.

Length x Width x Height....................................................................................................................... 30 x 28 x 18 in.

Electrical:

Power Requirement................................................................................................. 110V/220V, Single-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 110V

Full-Load Current Rating....................................................................................................... 12A at 110V, 6A at 220V

Minimum Circuit Size.............................................................................................................................................. 15A

Switch....................................................................................................................................................... Push Button

Switch Voltage..................................................................................................................................................... 110V

Cord Length............................................................................................................................................................ 5 ft.

Cord Gauge................................................................................................................................................... 14 gauge

Plug Included.......................................................................................................................................................... Yes

Included Plug Type...................................................................................................................... NEMA 5-15 for 110V

Recommended Plug/Outlet Type................................................................................................ NEMA 6-15 for 220V

Motors:

Main

Type.................................................................................................................. TEFC Capacitor Start Induction

Horsepower................................................................................................................................................ 1 HP

Voltage................................................................................................................................................ 110/220V

Prewired..................................................................................................................................................... 110V

Phase....................................................................................................................................................... Single

Amps......................................................................................................................................................... 12/6A

Speed................................................................................................................................................ 3450 RPM

Cycle......................................................................................................................................................... 60 Hz

Number of Speeds............................................................................................................................................ 1

Power Transfer ............................................................................................................................... Direct Drive

Bearings................................................................................................. Shielded and Permanently Lubricated

Summary of Contents for G1183

















































Reviews:

No comments

Related manuals for G1183

ulsonix TOPCLEAN VER User Manual preview
TOPCLEAN VER
Brand: ulsonix Pages: 218
Parkside KH 3123 PLANSLIP Manual preview
KH 3123 PLANSLIP
Brand: Parkside Pages: 10
Parkside AIR SANDBLASTING GUN Operation And Safety Notes preview
AIR SANDBLASTING GUN
Brand: Parkside Pages: 40
Parkside KH 3013 CAR POLISHER Manual preview
KH 3013 CAR POLISHER
Brand: Parkside Pages: 44
Parkside KH 3185 DELTA SANDER Operating And Safety Instructions Manual preview
KH 3185 DELTA SANDER
Brand: Parkside Pages: 60
Parkside KH 3029 POWER SANDER Manual preview
KH 3029 POWER SANDER
Brand: Parkside Pages: 55
Parkside KH 3032 BELT SANDER 600 WATT Operation And Safety Notes preview
KH 3032 BELT SANDER 600 WATT
Brand: Parkside Pages: 64
Parkside 89170 Operation And Safety Notes preview
89170
Brand: Parkside Pages: 55
Parkside 367467 2101 Translation Of The Original Instructions preview
367467 2101
Brand: Parkside Pages: 115
Parkside 360552 2010 Translation Of The Original Instructions preview
360552 2010
Brand: Parkside Pages: 124
Global Machinery Company POL1450 Instruction Manual preview
POL1450
Brand: Global Machinery Company Pages: 16
Napa 6-715 Instruction Manual preview
6-715
Brand: Napa Pages: 7
Palmgren 81110 Operating Manual & Parts List preview
81110
Brand: Palmgren Pages: 24
Parkside 339152 1910 Instructions Manual preview
339152 1910
Brand: Parkside Pages: 186
Makita BO6030J Instruction Manual preview
BO6030J
Brand: Makita Pages: 36
OMCA SMR 930 Handbook preview
SMR 930
Brand: OMCA Pages: 68
Noble Products Glass Genie 274GP1250 User Manual preview
Glass Genie 274GP1250
Brand: Noble Products Pages: 6
General International 15-150 MI Setup & Operation Manual preview
15-150 MI
Brand: General International Pages: 26

Brands by name

Popular brands

Load more brands