Model G1071 (Mfd. Since 11/10)
-15-
4. Secure the dust chute to the trunnion assem-
bly with (2)
3
⁄
8
"-16 x 1
1
⁄
2
" hex bolts,
3
⁄
8
" lock
washers and
3
⁄
8
"-16 hex nuts (see
Figure 9).
Figure 10.
Table stop bolt.
5. Thread the table stop bolt and jam nut into
the sander base, as shown in
Figure 10.
Sander Base
Jam Nut
Table Stop
Bolt
Figure 9.
Dust chute.
Dust Chute
Trunnion
Assembly
Hex Bolts & Nuts
To assemble your spindle sander:
1. With the assistance of a helper, carefully lift
the table/trunnion assembly onto the top of
the sander base.
2. Align the mounting holes in the trunnions with
the mounting holes in the sander base.
3. Using the (4)
3
⁄
8
"-16 x 1
1
⁄
4
" hex bolts and
3
⁄
8
" lock washers, secure the table/trunnion
assembly to the sander base as shown in
Figure 8.
Figure 8.
Table mounting.
Mounting
Hardware (1 of 4)
Trunnion
Sander Base
Lock
Handle
(1 of 2)
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
6. Loosen the table lock handles located on
each side of the table trunnion assembly (see
Figure 8).
Summary of Contents for G1071
Page 40: ......
