-56-
Model G1014Z/G1014ZX (Mfd. Since 08/22)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
109
109A
65
65
13
12
12
110
32
13
13
112
113
111
12
13
58
41
G1014Z Stand
REF PART #
DESCRIPTION
12
P1014Z012
HEX NUT 5/16-18
13
P1014Z013
FLAT WASHER 5/16
32
P1014Z032
HEX BOLT 5/16-18 X 1/2
41
P1014Z041
HEX BOLT 5/16-18 X 1
58
P1014Z058
RUBBER FOOT
65
P1014Z065
CARRIAGE BOLT 5/16-18 X 5/8
109
P1014Z109
LEG
109A P1014Z109A STAND ASSEMBLY
110
P1014Z110
LOWER BRACE (LONG)
111
P1014Z111
LOWER BRACE (SHORT)
112
P1014Z112
UPPER BRACE (LONG)
113
P1014Z113
UPPER BRACE (SHORT)
104V2
128
136
131
130
129V2
G1014Z
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ABRASION
INJURY HAZARD!
DO NOT touch moving
sanding belt or disc,
or personal injury may
occur!
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
MODEL G1014Z
6" X 48" BELT/9" DISC COMBO SANDER
WARNING!
To reduce risk of serious personal injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or worktable.
5. Maintain 1/16" maximum clearance between table and sandpaper.
6. Never touch moving sandpaper.
7. Always sand in accordance with directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and stable before operating. Only operate with all guards in place.
9. Never sand pointed stock with point facing into sanding rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when sandpaper is stopped.
11. Turn motor OFF and disconnect power before changing sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other articles that can get entangled. Tie back long hair and roll up sleeves.
13. Never reach over moving sanding disc or belt.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or when tired.
16. Prevent unauthorized use by children or untrained users; restrict access or disable machine when unattended.
Motor: 3/4 HP, 110V/220V, 1-Phase, 60 Hz
Prewired Voltage: 110V
Full Load Amps: 12A (110V); 6A (220V)
Belt Arm Tilt: 0–90°
Sanding Belt Size: 6" x 48"
Sanding Belt Speed: 1900 FPM
Table Tilt: 0–45°
Sanding Disc Diameter: 9"
Sanding Disc Speed: 2420 RPM
Weight: 117 lbs.
Mfd. for Grizzly in Taiwan
Date
S/N
Specifications
136
121
G1014Z Labels & Cosmetics
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
104V2 P1014Z104V2 MACHINE ID LABEL V2.08.22
130
P1014Z130
TOUCH-UP PAINT, GRIZZLY GREEN
121
P1014Z121
ENTANGLEMENT LABEL
131
P1014Z131
TOUCH-UP PAINT, GRIZZLY BLACK
128
P1014Z128
MODEL NUMBER LABEL
136
P1014Z136
ELECTRICITY LABEL
129V2 P1014Z129V2 COMBO WARNING LABEL V2.08.22
