Grizzly G0945, Owner'S Manual

Page: 6 / 60

To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Figure 1. Main components.
Figure 2. Fence components.
-4-
Model G0945/G0946/G0947 (Mfd. Since 06/21)
Controls &
Components
Main Components
B
C
A
D
E
F
G
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
A. Outfeed Table: Supports workpiece after it
passes over cutterhead.
B. Cutterhead Guard: Covers cutterhead until
pushed aside by workpiece during operation.
When workpiece leaves cutterhead, guard
springs back to its starting position. DO NOT
operate jointer if guard is not functioning
properly.
C. Infeed Table: Supports workpiece before it
reaches cutterhead. Height of infeed table
relative to cutterhead determines depth of
cut.
D. Infeed Table Adjustment Knob: Adjusts
height of infeed table to control depth of cut.
E. Table Height Lock Knob: Tighten to secure
infeed table position; loosen for making
table adjustments.
F. ON/OFF Paddle Switch w/Removable Key:
Turns motor ON when moved up; turns
motor
OFF when pressed down. Removal of
yellow key disables switch, preventing motor
operation.
G. Depth-of-Cut Scale: Shows depth of cut
(per pass).
H. Infeed/Outfeed Table Extensions (G0947):
Supports large workpieces beyond the length
of the infeed/outfeed tables.
Fence & Support Components
I
H
J
K
L
M
I. Fence: Supports workpiece laterally as it
moves across cutterhead; determines angle
of cut when edge or bevel joining.
J. Fence Bracket Assembly: Changes posi-
tion of fence relative to tables and secures it
in position during operation.
K. Dust Port: Connects machine to dust col-
lection system. ALWAYS remove dust port if
operating machine without dust collection!
L. Fence Slide Lock Handle: Adjusts position
of fence over tables. ALWAYS tighten lock
before beginning operations.
M. Fence Tilt Lock Handle: Secures fence tilt
angle. Fence tilt can be adjusted between
90º–135º. ALWAYS tighten lock before begin-
ning operations.