Grizzly G0944 Page 34 Owner'S Manual Download

Page: 34 / 36

-32-

Model G0944/G0944HEP (Mfd. Since 03/21)

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

Labels & Cosmetics

OUTLET

AMPUTATION

HAZARD!

DO NOT place
hands near inlet
during operation!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

WARNING!

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.

WARNING!

Specifications

S/N

Date

Motor: 1-1/2 HP, 110V, 1-PH, 60 Hz

Full-Load Current Rating: 15A

Inlet Size: 6"

Adapter Inlet Size: 4"

Airflow Performance: 1250 CFM

Max. Static Pressure: 10.4"

FIlter Rating: 1 Micron

Replacement Filter: T32555

Weight: 71 lbs.

To reduce the risk of serious injury when using this machine:

1. Read and understand owner’s manual before operating.

2. Always wear approved eye protection and respirator.

3. Only plug power cord into a grounded outlet.

4. Only use this machine to collect wood dust/chips—never

use to collect glass, metal, liquids, asbestos, silica, animal

parts, biohazards, burning material/ashes, etc.

5. Always disconnect power before servicing or cleaning.

6. Do not expose to rain or use in wet areas.

7. Keep hands, long hair, and loose clothing away from inlet.

8. Never leave machine unattended during operation.

9. Do not use if cord, plug, or any other electrical equipment

becomes damaged—promptly repair!

10. Do not use without dust bag or filter in place.

11. Prevent unauthorized use by children or untrained users.

MODEL G0944

1-1/2 HP WALL MOUNT

DUST COLLECTOR

WARNING!

Mfd. for Grizzly in Taiwan

OFF

101

102

103

104

105

106

108

107

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

101

P0944101

INLET WARNING LABEL

105

P0944105

READ MANUAL LABEL

102

P0944102

OUTLET DIRECTION LABEL

106

P0944106

EYE/LUNG WARNING LABEL

103

P0944103

G0944 ID LABEL

107

P0944107

TOUCH-UP PAINT, GRIZZLY GREEN

103

P0944HEP103

G0944HEP ID LABEL

108

P0944108

DISCONNECT POWER LABEL

104

P0944104

JUNCTION BOX LABEL

Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes

off or becomes unreadable, the owner of this machine MUST replace it in the original location

before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.

Summary of Contents for G0944





































Search results

Summary of Contents for G0944

Reviews:

Related manuals for G0944

Brands by name

Popular brands

Grizzly G0944, Owner'S Manual

Search results

Summary of Contents for G0944

Reviews:

Related manuals for G0944

Brands by name

Popular brands