Grizzly G0923, Owner'S Manual

Page: 29 / 56

Model G0923 (Mfd. Since 05/20)
-27-
Printing
Pausing Print
Typically, the Model G0923 prints from a .GCODE
file stored on an SD card. Print settings such as
print speed, fan speed, and nozzle temperature
can be changed during printing, and the operation
can be paused for an extended period of time and
resumed.
1. During printing, press control dial to open
print menu (see Figure 30).
Starting Print
1. Prepare .GCODE file following instructions,
in Slicing on Page 21, and load it to SD card.
2. Insert SD card into SD slot (see Figure 28).
3. Press control dial to open main menu.
4. Use control dial to select "Print from SD,"
navigate to prepared file, then press control
dial. Axes will home, then printing will begin.
Note: During printing, display returns to sta-
tus screen (see
Figure 29).
Figure 28. SD slot above display.
SD Card in
SD Slot
Figure 29. Print status screen.
Figure 30. Print menu.
2. Select "Pause print." Z-axis will raise while X
and Y axes home, then printer will stop and
pause menu will open (see
Figure 31).
Figure 31. Pause menu.
— Select "Resume print" to resume printing
from last position.
— Select "Stop print and save" to save stop
location. Refer to Stopping Print on Page
28.