NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 11. Crate inventory.
Model G0911–G0914 (Mfd. Since 05/21)
-19-
K
Crate Inventory (Figure 11) Qty
A. CNC Laser Cutter/Engraver ....................... 1
B. Primary Laser Tube .................................... 1
C. Secondary Laser Tube (G0913/G0914) ...... 1
D. Honeycomb Table....................................... 1
E. Water Chiller .............................................. 1
F. Water Tubing
5
⁄
16
" x 68" .............................. 2
G. Water Chiller Power Cord ........................... 1
H. Water Chiller Signal Cord ........................... 1
I. Collapsible Ducting 6" x 24" ....................... 1
J. Flexible Ducting 6" x 60" ............................ 3
K. Exhaust Port Adapter 6" ............................. 1
Inventory
A
D
B
C
E
H
J
G
F
I
Summary of Contents for G0911
Page 100: ......
