Grizzly G0898, Owner'S Manual, Page: 38 / 40

-36-
Model G0898 (Mfd. Since 12/19)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
KEEP DOOR
CLOSED
WHILE
OPERATING!
Always wear
ANSI-approved safety
glasses, face shield, and
respirator when using
this machine.
EYE/LUNG
INJURY HAZARD!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ABRASION
INJURY HAZARD!
DO NOT touch moving
sanding belt or
personal injury may
occur!
BELT ROTATION
Date
Mfd. for Grizzly in Taiwan
S/N
To reduce the risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with a backstop or workrest.
5. Maintain 1/16" maximum clearance between table and sandpaper.
6. Never touch moving sandpaper.
7. Always grind in accordance with directional arrows on machine.
8. Make sure grinder is properly assembled, adjusted, and stable before
operating. Only operate with all guards in place.
9. Never grind pointed stock with point facing into belt rotation, and never
force workpiece into grinding surface.
10. Do not grind in a flammable environment or near combustibles.
11. Only remove jammed pieces when sandpaper is stopped.
12. Turn motor OFF and disconnect power before changing sandpaper,
making adjustments, or servicing.
13. Do not wear loose clothing, gloves, jewelry, or other articles that can get
entangled. Tie back long hair and roll up sleeves.
14. Never reach over moving grinding belt.
15. Do not expose to rain or use in damp locations.
16. Do not operate under influence of drugs or alcohol, or when tired.
17. Prevent unauthorized use by children or untrained users; restrict access
or disable machine when unattended.
Specifications WARNING!
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Prewired Voltage: 110V
Full-Load: 11A at 110V, 5.5A at 220V
Sanding Belt Size: 2" x 48"
Sanding Belt Speed: 4000 FPM
Sanding Belt Tilt: 0°–90°
Table Tilt: 0°–90°
Drive Wheel Size: 6"
Contact Wheel Size: 7"
Platen Size: 2" x 5-7/8"
Weight: 95 lbs.
MODEL G0898
2" X 48" 2-WHEEL BELT
GRINDER/SANDER
101
102
103
104
105
106
107
108
109
110
Labels & Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
101 P0898101 BELT ROTATION LABEL 106 P0898106 MANUAL/PPE/ENTANGLEMENT LABEL
102 P0898102 MACHINE ID LABEL 107 P0898107 ABRASION INJURY LABEL
103 P0898103 DOOR CLOSED LABEL 108 P0898108 TOUCH-UP PAINT, GRIZZLY GREEN
104 P0898104 TOUCH-UP PAINT, GRIZZLY BEIGE 109 P0898109 DISCONNECT POWER LABEL
105 P0898105 GRIZZLY NAMEPLATE-MINI 110 P0898110 ELECTRICITY LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.