-22-
Model G0898 (Mfd. Since 12/19)
3. While supporting grinder body, loosen cap
screw shown in
Figure 30. If grinder is
upright it will fall back to a horizontal posi-
tion. Adjust and tighten cap screw at desired
angle.
4. Adjust platen until it lightly contacts belt, then
tighten cap screws loosened in
Step 2.
5. Close belt access door and lock with knob.
Figure 30. Grinder tilt lock cap screw.
Grinder Tilt
Lock Screw
To adjust grinder tilt:
1. DISCONNECT MACHINE FROM POWER!
2. Loosen both cap screws shown in Figure 29,
but do not remove.
Figure 29. Wheel guard and work table position
lock cap screws.
Work Table
Position Screw
Contact Wheel
Guard Screw
Adjusting
Grinder Tilt
The G0898 can be positioned vertically or hori-
zontally, or anywhere in between, depending on
your operation (see
Figure 28).
Figure 28. Grinder positioned for various
applications.
Summary of Contents for G0898
Page 40: ......