Model G0898 (Mfd. Since 12/19)
-19-
To complete a typical grinding operation, the
operator does the following:
1.
Examines workpiece to make sure it is suit-
able for grinding (i.e. without imbedded por-
eign objects, without an edge sharp enough
to cut belt, etc.).
2.
Puts on safety glasses and a respirator.
3.
Starts grinder.
4.
Holds workpiece firmly and flatly, pushes
workpiece into belt, and moves it to different
locations to wear sandpaper evenly and to
prevent it from overheating.
5.
Stops machine.
Operation Overview
•
Extend the life of the abrasive belt by reg-
ularly using a PRO-STIK® abrasive sur-
face cleaner (see
Accessories on
Page 25).
•
When grinding against contact wheel (
Page
23), tilt grinder horizontal for better control.
•
Hold workpiece securely with both hands.
Use table/rest whenever possible to support
workpiece. Do not force workpiece against
belt.
•
Never grind magnesium. Once shaved
or powdered, it is highly flammable and
magnesium fire is difficult to put out.
•
Remember that grinding metal often produc-
es sparks. DO NOT allow anyone to stand in
the path of the sparks. DO NOT grind metal
near flammable materials.
•
Make sure belt access door is closed and
latched during operation.
• Belts clog and wear. Change belts whenever
you notice a difference in grinding quality/
performance.
•
The workpiece will get hot as you continue
to grind. Cool the workpiece frequently by
quenching in water or another approved solu-
tion. Allow workpiece to dry before allowing it
to contact abrasive belt.
• Wear the proper protective clothing. Prepare
for particles to be expelled from the grinder
at high speeds. Wear safety glasses, face
shield, dust mask, earplugs, leather apron,
and heavy leather boots.
Grinding Tips
Moving belt can cause serious personal
injury if it comes in contact with fingers,
hands, or other body parts. Always support
workpiece against platen or work stop when
grinding. Use extreme care to provide a safe
distance between belt and any body part.
Summary of Contents for G0898
Page 40: ......