Grizzly G0898, Owner'S Manual, Page: 14 / 40

-12-
Model G0898 (Mfd. Since 12/19)
Motor Rewired
for 220V
GND
4. Use wire nuts to connect wires as indicated
in Figure 7. Twist wire nuts onto their respec-
tive wires and wrap them with electrical tape
so they will not come loose during operation.
5. Replace pre-installed 110V 15A circuit break-
er (see
Figure 8) with 220V 8A circuit breaker.
Figure 8. Location of circuit breaker.
Figure 6. Motor prewired for 110V.
The voltage conversion MUST be performed by
an electrician or qualified service personnel.
The voltage conversion procedure consists of
rewiring the motor and installing the correct plug.
A wiring diagram is provided on
Page 33 for your
reference.
Items Needed Qty
• Phillips Head Screwdriver #2 ..................... 1
• Electrical Tape ............................ As Needed
• Wire Cutters/Stripper .................................. 1
• NEMA 6-15 Plug ......................................... 1
• Circuit Breaker 8A (P0898061-2X) ............. 1
Converting Voltage
to 220V
To convert Model G0898 to 220V:
1. DISCONNECT MACHINE FROM POWER!
2. Cut off existing 5-15 plug.
3. Open motor junction box, then loosen two
wire nuts indicated in
Figure 6.
Figure 7. Motor rewired for 220V.
Motor Rewired
for 220V
GND
Connect
Wires with
Nuts Here
Motor Prewired
for 110V
GND
Loosen
These
Wire
Nuts
7. Install a 6-15 plug on power cord, according
to plug manufacturer's instructions.
— If plug manufacturer's instructions are not
available, NEMA standard 6-15 plug wir-
ing is provided on
Page 33.
6. Close and secure motor junction box.
Circuit
Breaker
Circuit
Breaker