Grizzly G0887, Owner'S Manual, Page: 52 / 108

-50-
Model G0887 (Mfd. Since 01/19)
Lubrication
Use the schedule below and the following instruc-
tions to properly lubricate the other components
that require lubrication.
Lubrication Task
Frequency
(Hours of
Operation)
Page
Ref.
Blade & Guides 8 Hrs. 51
Table & Vise 8 Hrs. 51
Headstock Pivot Points 40 Hrs.
52
Blade Speed Pulley 40 Hrs.
52
Vise Shaft 40 Hrs.
52
Blade Guide Arm Gib 40 Hrs. 52
Front Wheel Axle 40 Hrs. 52
Blade Tension Leadscrew 40 Hrs.
53
Figure 69. Recommended lubrication tasks.
Item(s) Needed Qty
NLGI#2 Grease (T26419 or Equivalent) .As Needed
ISO 68 Oil (SB1365 or Equivalent) .........As Needed
Clean Shop Rags ....................................As Needed
Grease Gun ..............................................................1
Stiff Brush .................................................................1
Clean Brush ..............................................................1
Hex Wrench 4, 5mm .........................................1 Ea.
SB1365—South Bend Way Oil-ISO 68
Engineered for the high pressure exerted on
horizontal or vertical ways and slides. Protects
against rust and corrosion. Ensures stick-free,
smooth motion which maximizes finishes and
extends the life of your machine. Won’t gum up!
12 oz. AMGA#2 (ISO 68 Equivalent)
Figure 71. Model SB1365 Way Oil.
T26419—Syn-O-Gen Synthetic Grease
Formulated with 100% pure synthesized hydrocar-
bon basestocks that are compounded with special
thickeners and additives to make Syn-O-Gen
non-melt, tacky, and water resistant. Extremely
low pour point, extremely high temperature oxida-
tion, and thermal stability produce a grease that is
unmatched in performance.
Figure 70. Model T26419 Syn-O-Gen Synthetic
Grease.