Model G0866 (Mfd. Since 11/18)
-19-
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Figure 24. Loose item inventory.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Box Contents (Figure 24)
Qty
A. Flat Head Screwdriver #2 ........................... 1
B. Phillips Screwdriver #2 ............................... 1
C. Sanding Belt 37" x 75" 100-Grit ................. 1
D. Sanding Belt 37" x 75" 180-Grit ................. 1
E. Platen Removal Tool .................................. 1
F. Roller Extraction Bolt .................................. 1
G. Graphite Pads............................................. 2
H. Felt Pad ...................................................... 1
I. Limit Switch Tips ........................................ 2
J. Combo Wrench 26mm ............................... 1
K. Open-End Wrench 21 x 23mm ................... 1
L. Open-End Wrench 17 x 19mm ................... 1
M. Open-End Wrench 12 x 14mm ................... 1
N. Open-End Wrench 8 x 10mm ..................... 1
O. Hex Wrench Set (1.5–10mm) ..................... 1
P. Flexible Grease Gun Extension ................. 1
Q. Door Keys ................................................... 2
R. Tool Box (Not Pictured) .............................. 1
Summary of Contents for G0866
Page 100: ......