Model G0853 (Mfd. Since 07/18)
-23-
Inventory (Figure 14)
Qty
K. Rip Fence Base .......................................... 1
L. Overhead Control Panel ............................. 1
M. Blade Guard Cover Assembly .................... 1
N. Blade Guard (Bubble) ................................. 1
O. Rip Fence Leadscrew Housing .................. 1
P. Middle Guard Arm Post .............................. 1
Q. Middle Guard Arm ...................................... 1
R. Upper Guard Arm ....................................... 1
S. Cord Clamps .............................................. 7
T. Lower Guard Arm ....................................... 1
U. Scoring Blade Arbor Wrench 30mm .......... 1
V. Open-Ends Wrench 19/24mm .................... 1
W. Closed-Ends Wrench 19/22mm.................. 1
X. Combo Wrench 30mm ............................... 1
Y. Main Blade Arbor Wrench 36mm ............... 1
Inventory
Inventory (Figure 13)
Qty
A. Small Extension Table ................................ 1
B. Large Extension Table ............................... 1
C. Crosscut Table ........................................... 1
D. Crosscut Fence .......................................... 1
E. Crosscut Table Support Bar ....................... 1
F. Rip Fence ................................................... 1
G. Cabinet Door .............................................. 1
H. Sliding Table .............................................. 1
I. Miter Fence ............................................... 1
J. Extension Table Leg w/Foot ...................... 1
These are the “loose” components shipped with
the machine. Before setup, lay them out to make
sure you have everything listed below.
If any non-proprietary parts are missing (e.g. a
nut, bolt, or washer), we will gladly ship them upon
verification of order. For the sake of expediency,
you can also get replacement parts at your local
hardware store.
Figure 13. G0853 Inventory 1.
A
B
C
D
E
F
G
H
J
I
Figure 14. G0853 Inventory 2.
L
K
M
N
O
P
Q
R
T
S
U
V
W
Y
X
Summary of Contents for G0853
Page 24: ...22 Model G0853 Mfd Since 07 18 5mm Hardware Recognition Chart...
Page 140: ......
