83
GB
vice, please send your equipment
cleaned and with an indication of the
fault to our service address.
Equipment sent freight collect – as
bulky goods, by express or other spe
-
cial freight – will not be accepted.
• We will dispose of the defective equip
-
ment sent to us, free of charge.
Technical Specifications
Motor voltage ................................ 40 V
Idle time
*
........................................ 25 min
Protection Class .................................... III
Idling speed (n
0
), Thread reel
..................................................6500 min
-1
Idling speed (n
0
), Metal cutting blade
..................................................7000 min
-1
Weight (without battery)
.............
ca. 4,3 kg
Metal cutting blade
Cutting radius ............................ 260 mm
Threads
Cutting radius ...........................
300 mm
Thread thickness ....................... 2,0 mm
Thread length .............................
2 x 4 m
Values in trimmer mode:
Sound pressure level (L
PA
)
.......
78,5 dB(A)
Sound power level (L
WA
)
Guaranteed .............................
94 dB(A)
Measured .......
91,4 dB(A); K
WA
=2,24 dB
Values for scythe:
Sound pressure level (L
PA
)
.......
87,6 dB(A)
Sound power level (L
WA
)
Guaranteed ...........................
100 dB(A)
Measured .......
97,5 dB(A); K
WA
=2,44 dB
Vibration (a
h
)
............1,64 m/s
2
, K
h
=1,5 m/s
2
Battery (Li-Ion ........................... DYMA81
Nominal voltage ..........
max. 40 V; 36 V
Energy ............................................. 90 Wh
Capacity...........................................2.5 Ah
Charging time .....................
approx. 1.25 h
Recharger .................................. DYMA83
Voltage input .........220-240 V~, 50 Hz, 1 A
Voltage output......................... 40 V 2 A
Protection class ................................ II
Protection category............................ IP20
* The actual runtime under load of a fully char
-
ged battery depends on how you work and on
the load put on the trimmer during operation.
Technical and visual changes may be
made without notice in the course of de
-
velopment. All dimensions, information
and specifications in these operating in
-
structions are therefore subject to change.
Legal claims made on the basis of the
operating instructions can therefore not be
enforced.
Maintenance Interval Table
Machine Part
Action
Before
Each Use
Operating Hours
10
20
Screws, nuts, bolts
Check, tighten
Complete machine
Check, clean if necessary
Operating handle
Check for function
Cutting head
Check correct installation
