20
7. Operation
7.1 Connect and Charge
7.3 Stop Charging
Insert one of the charging connectors into the EV and ensure the connector is fully seated/
locked in place. Once complete, the charging session will begin.
1. Unplug the charging station by pressing the connector button and removing the Charger
Connector from the EV (once the connector button is depressed, the charging session
terminates immediately).
2. Return the connector to the holster.
7.2 Grizzl-E Duo Intelligent Power Sharing
Grizzl-E Duo features intelligent power sharing to charge two electric vehicles at the same time.
Grizzl-E Duo’s power sharing algorithm shares amperage between two vehicles in the following
manner:
1. If one vehicle is connected to Duo, then the maximum amperage (40A,32A, 24A,16A based
on DIP Switch settings) is available for this vehicle.
2. If two vehicles are connected, then the maximum available amperage is divided evenly
between the two vehicles (Example: 40A / 2 = 20A for each vehicle).
3. If two vehicles are connected and one vehicle goes to state ‘Charging Complete’, then 8A
is dedicated to the completed vehicle. The remainder of the amperage is available for the
other vehicle (Example: 40A – 8A = 32A). If the completed vehicle goes to a Charging state
again, then only 8A will be available for this vehicle.