Griven Micro Waterled MK3, User Manual

Page: 7 / 7

page 7 of 7
551163
When operating in DMX mode the fixture can accept the
following RDM commands:
• Discovery: upon request of the RDM controller, the fixture
will signal its own presence (the RDM controller will
display the fixture on a list).
• DMX address reading and setting.
• Channels number reading and setting.
• On / Off identification: this command is used to identify the
fixture you want to get access to (the identification happens
by switching on all the LEDs at full intensity).
• Manufacturer: it displays the name of the manufacturer
(Griven).
• Model description: it displays the fixture’s model.
• Software version description: it displays the current version
of the firmware.
• Temperature: it displays the LEDs operating temperature
value.
DMX Chart
RDM functions
Mode Channel Function Value
#1
IR=4
1 0-100% Red 0-255
2 0-100% Green 0-255
3 0-100% Blue 0-255
4 0-100% White 0-255
#2
IR=5
1 0-100% Red 0-255
2 0-100% Green 0-255
3 0-100% Blue 0-255
4 0-100% White 0-255
5 0-100% Dimmer 0-255
#3
IR=6
1 0-100% Red 0-255
2 0-100% Green 0-255
3 0-100% Blue 0-255
4 0-100% White 0-255
5
0% Dimmer 0-5
0%-100% Dimmer 6-250
100% Dimmer 251-255
6
No Strobo 0-5
0-100% Strobo 6-250
100% Strobo 251-255
#4
IR=7
1 0-100% Red 0-255
2 0-100% Green 0-255
3 0-100% Blue 0-255
4 0-100% White 0-255
5
NO FUNCTION 0-5
2700K 6-7
2700K-3000K 8-40
3000K 41-42
3000K-3500K 43-75
3500K 76-77
3500K-4000K 78-110
4000K 111-112
4000K-4500K 113-145
4500K 146-147
4500K-5000K 148-179
5000K 180-181
5000K-5500K 182-214
5500K 215-216
5500K-6000K 217-249
6000K 250-255
6 0-100% Dimmer 0-255
#5
IR=8
1 0-100% Red 0-255
2 0-100% Red fine tuning 0-255
3 0-100% Green 0-255
4 0-100% Green fine tunig 0-255
5 0-100% Blue 0-255
6 0-100% Blue fine tuning 0-255
7 0-100% White 0-255
8 0-100% White fine tuning 0-255
RGBW
DW (Dynamic White)
Mode Channel Function Value
#1
IR=2
(Default)
1 0%-100% Warm white 0-255
2 0%-100% Cold White 0-255
#2
IR=3
1 0%-100% Warm white 0-255
2 0%-100% Cold white 0-255
3 0%-100% dimmer 0-255
#3
IR=3
1 0%-100% Warm white 0-255
2 0%-100% Warm white fine 0-255
3 0%-100% Cold white 0-255
4 0%-100% Cold White fine 0-255
Note: in absence of DMX signal the LEDs will remain ON .
Channel Function Value
1 0%-100% dimmer 0-255
Note: in absence of DMX signal the LEDs will remain ON .
Monochromatic version
Mode Channel Function Value
#6
IR=9
(Default)
1 0-100% Red 0-255
2 0-100% Green 0-255
3 0-100% Blue 0-255
4
0-100% Calibrated White
(affects RGB channels)
0-255
Note: in absence of DMX signal the LEDs will remain OFF .