The connection of the XLR 3 poles must be as follows:
pin 1---> function GND (SHIELD)
pin 2---> function SIGNAL -
pin 3---> function
Pls. ensure that the cables are properly connected.
Use shielded cable.
Gobo changing
Open the lamp cover as per the lamp replacement and figure out the gobo you want to change. If it
is a fixed gobo (pict.1) remove it carefully using a screw driver to open at least two of three fixing
splines (A). Insert the new one and closed the splines. If it is a rotating gobo (pict.2) lightly press
the gobo towarads the directions of the arrow until the gobo and the rubber band are out of the
gear housing.
pict.1
pict.1
Summary of Contents for GR 0191 MSD 250
Page 1: ...Foglio di Istruzioni Instructions POPSCAN GR 0193 HMI 575 GR 0191 MSD 250...
Page 14: ......
Page 15: ......
