USE OF THE LANTERN
DMX standard mode
Please make sure that the display is correctly set.
Every single COLORWAY uses 3 channels (2 more when specifically selected).
Please set the display of each lantern as per following diagram when more lanterns are controlled
through 1 DMX controller.
DISPLAY AND CONTROL PANEL USE
Led colour indicates the projector mode.
Green led indicates the operating mode.
Red led indicates the setting or the zapping mode.
When the projector is in the operating mode the display indicates the DMX addressing number,
which is 001 the first time you turn it on.
In order to change the DMX addressing number push (SELECT) then (-) or (+).
Once chosen the desired number push (ENTER).
Push (SELECT) twice when you want to activate or zap an option. To memorise it push (ENTER).
If options are not entered within 15 seconds the projector returns to the operating mode.
DMX Addressing
Channels
Projector 1
0 0 1
Projector 2
0 0 6
Projector 3
0 1 1
Projector 4
0 1 6
Projector 5
0 2 1
Projector 6
0 2 6
Projector 7
0 3 1
Projector 8
0 3 6
Projector 9
0 4 1
Projector 10
0 4 6
Projector 11
0 5 1
Projector 12
0 5 6
Projector 13
0 6 1
Projector 14
0 6 6
Projector 15
0 7 1
Projector 16
0 7 6
