30
English
7.1 Setting operating mode
By the dip-switch set it is possible to select one of the following operating modes:
• using DMX512 signal control mode
Each fixture is controlled from DMX512 signal control.
• MASTER-SLAVE or AUTOMATIC mode
The projector operates independently, without DMX512 signal control.
7.2 Setting DMX address
To access to the dip-switch panel “R” it is necessary untighten
the screw
“6”
and remove the box cover.
One led is next to the dip-switch panel to notify the status of the
unit.
In the presence of DMX signal, the red led will be steady on, in
the absence of signal, the red led will flash.
Each
Goboled 80
use 1 DMX channels.
In case of more units , the first unit will be set with address 001, the second unit with address 002, the third unit with
address 003, etc.
The number of the DMX address is to be calculated by summing the values corresponding to the activated dip-
switches, which are written in the upper side of the dip-switch set (1, 2, 4, 8, 16, etc.).
1 2 3 4 5 6 7 8 9 10 11 12
1
2
4
8
16
32
64
12
8
25
6
N
.C
.
N
.C
.
D
M
X
m
od
e
Example
Unit with address 001
(dip-switch n°1 = ON)
15
6
7.0 Use of the unit
