Grillstream GCH20MG Operating Manual Download Page 1

Classic 2 Burner Hybrid Barbecue

GCH20MG

Necessary 

Tools

WARNING! FOR YOUR SAFETY, FOR OUTDOOR USE ONLY

Please read these instructions carefully and ensure that your barbecue is properly installed, assembled,

maintained and serviced in accordance with these instructions.

Failure to follow these instructions may result in serious injury and/or damage to property.

Carbon Monoxide Hazard

Using a barbecue inside can kill you,

it gives off Carbon Monoxide, which has no odour.

Never use a barbecue in enclosed spaces such as  

a tent, home/building, vehicle or garage.

This product takes approximately 

35 MINUTES

  

to assemble with 

2 PEOPLE.

 The fittings pack 

contains 

SMALL ITEMS

 which should be 

KEPT 

AWAY FROM YOUNG CHILDREN

. Read this 

leaflet in full before commencing assembly.

Please check the pack contents before attempting to assemble this product. 

A full checklist of components is given in this leaflet. If any components are 

missing, please contact the retailer from whom you bought this product.

AA Battery (Not included)

x 4

x 12

x 44

x 12

x 2

x 44

Scan me for step by 

step video instructions

Summary of Contents for GCH20MG

































Reviews: