28
9.
In the GridProtect Protection Level area, select the number of Gridstore Storage Nodes that
can fail without data loss or disruption to the vStore.
Note:
The GridProtect level will vary depending on the total number of Gridstore Storage
Nodes and total capacity, in the vStore. The maximum number of Gridstore Storage Nodes is
one less than half of the total number of Gridstore Storage Nodes participating in the vStore.
The greater number you choose, the greater the protection, but the less available capacity
you will have.
10.
Click the Next button.
The vStore Confirmation page opens.
11.
Verify that the settings are correct and click the Next button.
The vStore is created.
12.
When finished, click the OK button.
The new vStore displays in the left navigation tree in the
vStores area, as well as in the
vStores window to the right.
13.
Repeat steps 3 to 12 to create additional vStores.
(see pg. 46).
