Gridstore GS-1000-2 Administrator'S Manual Download Page 116

Page: 116 / 143

GRIDSTORE ADMINISTRATOR’S GUIDE 115

The Delete vStore Data page opens.

Select one of the options and click the Next button.

If you selected Preserve data and export volumes, your data is exported to a partition on the

disk in each Gridstore Storage Node.
The Confirmation page opens, displaying all the nodes from which Gridstore software will be

uninstalled. This includes both Gridstore Storage Nodes and Clients.

Click the Next button.

After the uninstall completes, click the Close button.

Gridstore software is removed from all nodes on the Grid, including the host computer from

which you made this command. You are left in your operating system.

Tip:

If you would like to re-install software on the Grid to re-create it, you would need to follow

the appropriate steps in

Setting Up the Grid

on pg. 7.

Summary of Contents for GS-1000-2
















































































































































Search results

Summary of Contents for GS-1000-2

Reviews:

Related manuals for GS-1000-2

Brands by name

Popular brands

Gridstore GS-1000-2, Administrator'S Manual

Search results

Summary of Contents for GS-1000-2

Reviews:

Related manuals for GS-1000-2

Brands by name

Popular brands