DT-7000K20-501 ATM User
Manual
Confidential material of GRG, No disclosure to unauthorized Party
59
Appendix B Screwing the ground feet into the safe
To ensure the ATM is as level as possible with the floor, it is necessary to screw the ground feet
into the safe completely. The detailed operation is as follows:
Tool: fork-lift truck (manual or electric), 16mm ratchet wrench or 30mm adjustable wrench
Note:
1) 16mm ratchet wrench is used when the ATM is configured with 2 cassettes or the units and
modules of the ATM are removed; 30mm adjustable wrench is used when the ATM is configured
with 4 cassettes and the units and modules are not removed.
2) All operation should be accompanied with professional service engineers.
1.
Screw the ground feet into the safe by ratchet wrench
Screw the ground feet (each at the four corners) counterclockwise, and make sure they are
completely screwed into the safe.
Note:
1) Remove the units or modules that affect the operation, which should be accompanied with
professional service engineers.
2) Make sure each ground foot is tapped into the safe, otherwise, the ATM will not be up-right,
which may lead to personal injury or operation fault.
2.
Screw the ground feet into the safe by adjustable wrench
(1)
Lift the ATM up by the fork-lift truck.
(2)
Screw the ground feet (each at the four corners) clockwise, and make sure they are completely
screwed into the safe.
Summary of Contents for DT-7000K20-501
Page 71: ...62 ...