background image

10 | Technical data

G 1720

22 / 25

B-H86.0.0C.DB2-1.0

10 Technical data

Measuring range temperature

-70.0 .. +250.0 °C (-94.0 .. +482.0 °F)

Accuracy temperature

-20 .. +100 °C: ±0.1 K ±1 digit

otherwise: ±0.2 % of measured value ± 2 digits

Response time T90 water (0.4 m/s)

approx. 3 s

Measuring cycle

approx. 2 measurements per second

Temperature connections

Permanently connected Pt1000 sensor (EN 60751)

Display

3-line segment LCD, additional symbols, illuminated (adjustable
white, permanent illumination)

Additional functions

Min/max/hold, alarm (optical and acoustic)

Compensation

Offset and gradient correction

Housing

Break-proof ABS housing

Protection rating

IP65 / IP67

Dimensions L*W*H
[mm]

108 * 54 * 28 mm without kink protection

Weight

150 g, incl. battery and sensor

Operating conditions

-20 to 50 °C; 0 to 95 % r.h. (temporarily 100 % r.h.)

Storage temperature

-20 to 70 °C

Current supply

2*AA battery (included in the scope of delivery)

Current requirement/

battery life

approx. 0.4 mA, approx. 2 mA with lighting

Service life > 5000 hours with alkaline batteries (without backlight-
ing)

Battery indicator

4-stage battery status indicator,

Replacement indicator for depleted batteries: "BAT"

Auto-power-OFF function

The device switches off automatically if this is activated

Directives and standards

The devices conform to the following Directives of the Council for
the harmonisation of legal regulations of the Member States:

2014/30/EU EMC Directive

2011/65/EU RoHS

Applied harmonised standards:

EN 61326-1:2013 Emission limits: Class B
Immunity according to Table 2
Additional errors: < 0.5 % FS

EN 50581:2012

Summary of Contents for G 1720


























Reviews: