4
Operation
38 / 72
Instruction manual - MULTILINE NEXT DC
© 2019 GREINER GmbH
G
REI
N
ER_
mul
til
ine
_ne
xt
_d
c_
ma
nu
al
_EN
_4
22
55
02
_re
v_
2.d
oc
x
4.10
Footrest
Removing and attaching the footrest
The footrest (1) can be removed. To remove the footrest, it must first be fully extended (see 4.3 Hand control).
Release the two handwheels (2) and then pull out the footrest upwards.
When reinstalling, make sure that the connecting bolts (3) are fully engaged in the counterpart. Now tighten the
two handwheels firmly again.
1.
Footrest
2.
Handwheel
3.
Connecting bolt
Fig. 48 Removing and attaching the footrest
TIP
In the version with 5 adjustment drives (only 4225000/4225100), the footrest is continuously elec-
trically adjustable.
The footrest can be adjusted manually (4223000/4223100 or 4224000/4224100) in both the 3 and
4 actuator versions.
Manual footrest
The position of the footrest (1) is continuously adjustable. Press down the clamping lever (4) to release. Push in
or pull out the footrest. When moving with the other hand, lift the footrest slightly to relieve the load on the
guides. To fix them in place, pull the clamping lever upwards.
NOTE
Do not use force to tighten the clamping lever beyond the noticeable end position.
1.
Footrest
4.
Clamping lever
Fig. 49 Manual footrest
1
1
4
2
3
