GREER COMPANY
GREER COMPANY
GREER COMPANY
GREER COMPANY
Crane Systems
Crane Systems
Crane Systems
Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705
PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL
TEL: 714) 259-9702 FAX: 714) 259-7626
30
OF
39
COMMAND 11 ALARMS
COMMAND 11 ALARMS
COMMAND 11 ALARMS
COMMAND 11 ALARMS
continued
COMMAND 11 ALARMS
COMMAND 11 ALARMS
COMMAND 11 ALARMS
COMMAND 11 ALARMS
0
.
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1.
CHOOSE MENU UP OR MENU DOWN AND GO TO 11 ALARMS.
......................................................
2 or 3
2 or 3
2 or 3
2 or 3
2.
START 11 ALARMS.
........................................................................................................................................
1
11
1
THE DISPLAY WILL READ:
Free Boom Mode? (y/n)
PRESS KEY UNTIL DESIRED ENTRY (Yes or No) APPEARS.
.....................................................................
1
11
1
EXIT FREE BOOM MODE.
.................................................................................................................................
6
66
6
3.
THE DISPLAY WILL READ:
Area Alarm? (y/n)
PRESS KEY UNTIL DESIRED ENTRY (Yes or No) APPEARS.
.....................................................................
1
11
1
EXIT
AREA ALARM.
..........................................................................................................................................
6
66
6
4.
THE DISPLAY WILL READ:
Low Angle Alarm? (y/n)
PRESS KEY UNTIL DESIRED ENTRY (Yes or No) APPEARS.
.....................................................................
1
11
1
EXIT LOW ANGLE ALARM.
...............................................................................................................................
6
66
6
5.
THE DISPLAY WILL READ:
Alt Chart? y/n
.
PRESS KEY UNTIL DESIRED ENTRY (Yes or No) APPEARS.
.....................................................................
1
11
1
EXIT ALT CHART.
...........................................................................................................................................................
6
66
6
IF
YES,
THE DISPLAY WILL READ:
Load Scale X.XXX
THIS NUMBER CAN BE MODIFIED BY USING THE NUMBER ENTRY ROUTINE.
6.
EXIT THE ROUTINE.
...........................................................................................................................................
6
66
6
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6
1, 2, 3, 4, or 6
1, 2, 3, 4, or 6
1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.
