GREER Company MICROGUARD 434, Calibration Manual

Page: 27 / 39

GREER COMPANY
GREER COMPANY GREER COMPANY
GREER COMPANY
Crane Systems Crane Systems Crane Systems Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
27
OF
39
COMMAND 10 ROPE LIMITS COMMAND 10 ROPE LIMITS COMMAND 10 ROPE LIMITS COMMAND 10 ROPE LIMITS
0 .
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1.
CHOOSE MENU UP OR MENU DOWN AND GO TO 10 ROPE LIMITS. ..............................................
2
22
2
OR
3
3 3
3
2.
START 10 ROPE LIMITS . ..................................................................................................................................
1 11 1
THE DISPLAY WILL READ: ENTER ROPELIM 0. CURRENTLY = XX.XX.
3.
START CALIBRATION OF ROPE LIM 0. ..........................................................................................................
1 11 1
4.
CONFIRM OR ABORT THE CALIBRATION. ...............................................................
1 1 1 1
CONFIRM
/ 3 / 3 / 3 / 3
ABORT
5.
USE NUMBER ENTRY PROCEDURE TO ENTER THE NEW LIMIT
THE DISPLAY WILL READ: ENTER ROPE LIM 0.
CURRENTLY = XX.XX (VALUE ENTERED).
6.
CHOOSE EXIT. ..................................................................................................................................................
6
66
6
THE DISPLAY WILL READ: ENTER ROPE LIMIT 1.
CURRENTLY = XX.XX.
7
.
START THE CALIBRATION OF ROPE LIMIT 1. ..............................................................................................
1
11
1
8.
CONFIRM OR ABORT THE CALIBRATION. ...............................................................
1 1 1 1
CONFIRM
/ 3 / 3 / 3 / 3
ABORT
9.
USE THE NUMBER ENTRY PROCEDURE TO ENTER THE NEW LIMIT.
THE DISPLAY WILL READ:
ENTER ROPE LIM 1. CURRENTLY = XX.XX (VALUE ENTERED).
10.
EXIT THE ROUTINE. ..........................................................................................................................................
6 66 6
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.