PEST TRAP
Model No.:GM931G
INSTRUCTION MANUAL
PLEASE READ THIS MANUAL CAREFULLY
BEFORE USING THE APPLIANCE.
KEEP MANUAL IN A SAFE PLACE FOR EASY
REFERENCE
Always use the proper parts supplied with the unit.
The UV lamp has approximately a six month life, after which time it may need to be replaced. To replace the bulb:
1
.
Unscrew the four screws holding the basket underneath the unit and gently remove. Please note that this section
is connect to the fan – care must be taken not to break the wires.
2
.
Unscrew the single screw in the clamp holding the bulb in place.
3
.
Remove the used bulb and replace with new bulb.
4
.
Re-screw the clamp in place.
5
.
Replace the basket and re-screw the four holding screws into place.
TROUBLESHOOTING
Problem
Possible Reason
Recommendation
Lamp will not light up.
The unit is not properly plugged into outlet.
Check electrical connection.
Units On/Off switch is set to Off.
Switch on.
UV lamp has expired.
Replace UV lamp.
Not performing correctly
The unit is not being used according to the
manual.
Put the unit in a position as described in the
manual.
UV lamp may be weakening
Replace UV lamp.
Abnormal Vibration
The unit has been incorrectlyassembled.
Please check manual for correct assembly.
SUMMARY OF SAFETY INSTRUCTIONS
Avoid interfering by other
light resources
Pull out the plug when cleaning
Maintain by professional staff
Prohibition
Prohibit look directly at lights
Do not insert the fingers
