2. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
3. Push the battery pack into the battery compartment until
the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. To remove the battery, open the battery compartment flap
then press the battery release button on the top of the
battery pack and pull the battery pack out of speaker.
TIP:
This speaker can also connect to the power outlet
directly. Insert the included adapter to supply the power. This
will automatically provide continuous current to your speaker.
NOTE
The adapter can not charge the battery pack. Please use
Greenworks charger to charge the battery pack.
CAUTION
Avoid placing the speaker on wet or dirty surfaces.
10
OPERATION
IMPORTANT
Before you operate the machine, read and understand the
safety regulations and the operation instructions.
WARNING
Be careful when you operate the machine and always
observe your surroundings before operating tool.
10.1 USE YOUR SPEAKER
1. Install the battery pack or connect the power source.
2. Press the ON/OFF button to turn the machine on.
3. Turn on Bluetooth on your Bluetooth enabled device to
choose Greenworks 24V in the list
4. The Bluetooth search button will be steady white if the
pairing succeeds.
5. Press function button to play/pause the audio.
NOTE
If your smart device cannot discover the speaker, please
press and hold Bluetooth search button and try to pair again.
If your paired phone device receives a call, any playback
will be paused and the rings come through the speaker.
This speaker can charge your phone when using adapter to
power the speaker. Use a qualified USB cable to connect
your phone and speaker. The speaker will automatically
provide power to your phone.
10.2 AUX CONNECTION
1. Turn on the speaker.
2. Connect an external audio device to the speaker via 3.5
mm audio cable.
3. Press function button to play the audio.
10.3 BROADCAST MODE
This speaker can wirelessly connect to other Greenworks
Bluetooth speakers and play the same audio at the same
times.
1. Turn on the speakers. Make sure that your speakers are
within 1 meter.
2. Press and hold the function button for 3 seconds to enter
broadcast mode. The Bletooth button turns to green and
blinks.
3. The Bluetooth button is solid on when the connection is
succeeded.
NOTE
After the broadcast pairing is successful, the "+", "-" and
"Play/Pause" function on the second speaker will not work.
11
MAINTENANCE
WARNING
When servicing, use only identical replacement parts. Use
of any other parts could create a hazard or cause product
damage.
11.1
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
12
TROUBLESHOOTING
Problem
Possible cause
Solution
The speaker does
not start.
The battery ca-
pacity is low.
Charge the battery
pack.
The on /off button
is defective.
Contact the serv-
ice center.
The speaker is not
connected to pow-
er source.
Connect the power
source.
5
English (Original Instructions)
EN