GreenWorks 25223 Quick Start Manual Download Page 1

19” 40 V Lithium-Ion Cordless Mower

19 po. Tondeuse à batterie au lithium-ion de 40 V

Podadora inalámbrica de 19 pulg. de ión de litio de 40 V

Q

GUÍA PARA COMIENZO RÁPIDO

GUIDE DE DÉMARRAGE RAPIDE

UICK START GUIDE

Model # / Modèle # / Modelo #: 25223

WARNING:

AVERTISSEMENT:

Rev:01

Printed in China / Imprimé en Chine / Impreso en China

This Quick Start Guide is not a substitute for reading the operator's manual. To reduce the risk 

of injury or death, user must read and understand operator's manual before using this product.

Ce Guide de Démarrage Rapide ne vous dispense pas de lire le manuel utilisateur. 

Pour réduire les risques de blessures éventuellement mortelles, l'utilisateur doit lire 

et comprendre le manuel utilisateur avant d'utiliser ce produit.

ADVERTENCIA:

No se debe considerar esta guía para comienzo rápido como substituto de una lectura

completa del manual del operador. Para reducir el riesgo de lesiones o de muerte, el

usuario debe leer y comprender el manual del operador antes de usar el producto.

• Pull up and back on the upper handle to raise the handle 

into operating position. Make certain the handles snap 

into place securely.

• Tighten the upper handle with the cam locks on both 

sides.

• Tighten the lower handle with the handle knobs on both 

sides.

• Lift the chute cover (1).

• Lift the grass catcher by its handle (2) and place under 

the chute cover so that the hooks (3) on the grass catcher 

frame are seated into the slots in the handle bracket.

• Release the chute cover. When installed correctly, the 

hooks on the grass catcher will rest securely in the slots 

on the handle brackets.

• To remove the mulching plug, lift 

the chute cover (1).

• Grasp the handle (2) of the 

mulching plug and pull the mulching 

plug out using the handle.

• The mulching plug (3) is inserted on 

an angle, so it requires some force to 

remove it.

• The mulching plug must be 

removed in order to install the grass 

catcher bag.

The mulching plug must be 

re-installed when the grass catcher 

bag is removed.

• Lift and hold up the battery door.

• Place the battery pack on the mower. 

Align guided ribs on battery pack with 

grooves in the product’s battery port.

• Make sure the latch on bottom of the 

battery pack snaps in place and that 

battery pack is fully seated and secure 

in the mower before beginning 

operation.

• Insert the key.

• If the machine is not going to be 

used immediately, do not insert the 

key.

• Close the door.

To start the motor:

• Open the battery door and insert the 

key into the slot. 

• Press and hold the safety lock-out 

button (1). 

• Pull the bail switch (2) upward to the 

handle to start the mower and release 

the button.

To stop the motor:

• Release the bail switch.

• Lift the side discharge cover (1).

• Align the grooves on the discharge chute (2) with the pins on the underside of the 

discharge cover (1).

• Lower the discharge chute (2) until the hooks on the mower deck are secured in the 

openings in the discharge chute (2).

• Release the side discharge cover (1).

• To raise the blade height, grasp the height adjustment 

lever (1) and move it toward the back of the mower.

• To lower the blade height, grasp the height adjustment 

lever (1) and move it toward the front of the mower.

UNFOLDING AND ADJUSTING HANDLE 

INSTALLING THE GRASS CATCHER BAG 

CUTTING HEIGHT ADJUSTMENT

INSTALLING THE MULCHING PLUG

INSTALLING BATTERY PACK

STARTING/STOPPING THE MOWER

INSTALLING SIDE DISCHARGE CHUTE

EN

Bail switch

Safety lock-out

button

1

Handle knob

Cam locks

Handle knob

3

Slots

1

2

2

1

Key

Battery

Battery door

1

2

3

Reviews: