GreenWorks 2101602 Operator'S Manual Download Page 13

Problem

Possible Cause

Solution

The line

does not ad-

vance.

Lines are welded

to themselves.

Lubricate with silicone

spray.

Not enough line

on spool.

Install more line.

Lines are worn too

short.

Advance the cutting line.

Lines are tangled

on spool.

1. Remove the lines from

the spool.

2. Wind the lines.

The line

keeps

breaking.

The machine is

used incorrectly.

1. Cut with the tip of the

line, avoid stones, walls

and other hard objects.

2. Advance the cutting

line regularly to keep full

cutting width.

The grass

winds

around the

trimmer

head and

motor hous-

ing.

Cut tall grass at

ground level.

1. Cut tall grass from the

top down.

2. Remove no more than

8" in each pass to prevent

wrapping.

The line

does not cut

well.

The cut-off blade

becomes dull.

Sharpen the cut-off blade

with a file or replace it.

Vibration

increases

obviously.

The line is worn

down at one side

and not advanced

in time.

Make sure that the line on

both sides is normal. Ad-

vance the line.

13

TECHNICAL DATA

Type

Cordless, battery powered

Motor

40V Brushed Brushed

No load speed

7500 (±10%) RPM

Cutting line diameter

0.065" (1.65 mm)

Cutting path diameter

12" (300 mm)

Feed Type

Auto Feed

Weight (without battery

pack)

6.06 lbs (2.75 kg)

Battery model

29462/2901319/29472/

BAF724 and other BAF ser-

ies

Charger model

29482/CAF806 and other

CAF series

The recommended ambient temperature range:

Item

Temperature

String trimmer storage tem-

perature range

32°F (0°C) - 113°F (45°C)

String trimmer operation

temperature range

32°F (0°C) - 113°F (45°C)

Battery charging temperature

range

39°F (4°C) - 104°F (40°C)

Charger operation tempera-

ture range

39°F (4°C) - 104°F (40°C)

Battery storage temperature

range

32°F (0°C) - 113°F (45°C)

Battery discharging tempera-

ture range

32°F (0°C) - 113°F (45°C)

14

LIMITED WARRANTY

YEAR 

ANS 

AÑOS

LIMITED WARRANTY

GARANTIE LIMITÉE

GARANTÍA 

LIMITADA

3

Greenworks hereby warranties this product, to the original

purchaser with proof of purchase, for a period of three (3)

years against defects in materials, parts or workmanship.

Greenworks, at its own discretion, will repair or replace any

and all parts found to be defective, through normal use, free

of charge to the customer. This warranty is valid only for

units which have been used for personal use that have not

been purchased or rented for industrial/commercial use, and

that have been maintained in accordance with the instructions

in the owners’ manual supplied with the product when new.

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse,

commercial use, abuse, neglect, accident, improper

maintenance, or alteration; or

2. The unit, if it has not been operated and/or maintained in

accordance with the owner's manual; or

3. Normal wear;
4. Routine maintenance items such as lubricants, blade

sharpening;

5. Normal deterioration of the exterior finish due to use or

exposure.

HELPLINE:

Warranty service is available by calling our toll-free helpline

at 1-888-909-6757.

12

English

EN

Summary of Contents for 2101602










































Reviews: