
Problem
Possible cause
Solution
The motor is on,
blades do not
move.
The machine has
damage.
Do not use the ma-
chine and speak to
service center.
The blades are
blocked.
Remove battery
pack then clear
blockage from the
blades.
There is too much
noise and/or vibra-
tion during opera-
tion.
The parts are loos-
en.
1. Stop the ma-
chine.
2. Remove the
battery.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
The parts have
damage.
Do not use the ma-
chine and speak to
service center.
17
TECHNICAL DATA
Category
Pole saw
Voltage
40V
Guide bar length
8'' (203 mm)
Chain pitch
3/8" (9.5 mm)
Chain gauge
0.050''(1.27 mm)
Chain oil capacity
50 ml
Weight (without battery
pack)
8.38 lbs. (3.8 kg)
Chain
91PJ033X / CL15033X
Guide bar
080NDEA318 /
M1500833-1318TL
Category
Pole hedge trimmer
Voltage
40V
No load speed
2800 (±10%) SPM
Blade length
20''
Cutting capacity
1.1"
Weight (without battery
pack)
9.57 lbs. (4.3 kg)
Battery model
29652 and other BAF series
Charger model
29692 and other CAF series
The recommended ambient temperature range:
Item
Temperature
Appliance storage tempera-
ture range
-4°F (-20°C) - 158°F (70°C)
Appliance operation temper-
ature range
6.8°F (-14°C) - 104°F (40°C)
Battery charging temperature
range
39°F (4°C) - 113°F (45°C)
Charger operation tempera-
ture range
39°F (4°C) - 113°F (45°C)
Battery storage temperature
range
32°F (0°C) - 73°F (23°C)
Battery discharging tempera-
ture range
6.8°F (-14°C) - 113°F (45°C)
18
LIMITED WARRANTY
YEAR
ANS
LIMITED WARRANTY
GARANTIE
LIMITÉE
3
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline,
at 1-888-909-6757.
15
English
EN