15
English (Original Instructions)
Height adjustment lever
Hooks
220-240V~, 50Hz,
LpA 79.0 dB, K=3
2.5 m/s , K=1.5
Height of cut
20 mm - 80 mm
No-load speed
See figure 1.
Before use of this product, familiarize yourself with all
For your safety, it is required that the plug
cord must be protected against splash water,
and should be performed only by a qualified service
servicing, use only identical replacement parts.
Safety, performance, and dependability have been given
objects being thrown into your eyes, which can result
operation, always wear safety goggles or safety glasses
with side shields and, when needed, a full face shield.
operating features and safety rules.
GRASSBOX
The grassbox collects grass clippings and prevents them
from being discharged across your lawn as you mow.
HEIGHT ADjUSTMENT LEVER
The height adjustment lever provides cutting height
adjustments.
MOTOR CONTROL CABLE
The motor control cable, located on the upper handle of
the mower, engages and disengages the motor and blade.
WARNING
If any parts are damaged or missing do not operate this
product until the parts are replaced. Using a product
with damaged or missing parts could result in serious
personal injury.
WARNING
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
WARNING
To prevent accidental starting that could cause serious
personal injury, always disconnect from the power
supply when assembling parts.
WARNING
Never operate the mower without the proper safety
devices in place and working. Never operate the mower
with damaged safety devices. Operation of this product
with damaged or missing parts could result in serious
personal injury.
ATTACHING THE LOWER HANDLE PIECES TO THE
MOWER BASE
See figure 2.
■
Align holes at the lower end of each handle arm with
posts extending from the mower base side plates.
■
Tighten them using the wing nuts provided.
INSTALLING THE UPPER HANDLE
See figure 3.
■
Align the holes on the upper handle with those on the
lower handle pieces.
■ Insert the bolts, and tighten them using the wing nuts
provided.
INSTALLING THE GRASSBOX
See figure 4.
■
Lift the rear discharge door.
■
Lift the grassbox by its handle and place under the
rear door, so that the hooks on the grassbox frame are
seated into the slots in the handle bracket.
■ Release the rear door. When installed correctly, the
ASSEMBLY
UNPACKING
This product requires assembly.
■
Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
WARNING
Do not use this product if any parts on the packing list are
already assembled to your product when you unpack it.
Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
■
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
■
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
■ If any parts are damaged or missing, please call your
Greenworks tools service centre for assistance.
PACKING LIST
■
Lawn mower
■
2 lower handle pieces
■
4 wing nuts
■
2 bolts
■
Cord retainer
■
Grassbox
■
Operator’s manual
