12
English (Original Instructions)
Your product has been engineered and manufactured to
Greenworks tools' high standard for dependability, ease of
operation, and operator safety. When properly cared for,
it will give you years of rugged, trouble-free performance.
Thank you for buying a Greenworks tools product.
Save this manual for future reference
SAFETY NOTES
WARNING
Read these instructions carefully, be familiar with the
controls and the proper use of the machine.
Please keep the instructions safe for later use!
EXPLANATION OF SYMBOLS
Read operator's manual.
Keep bystanders away
Beware of sharp blades. Blades
continue to rotate after the motor
is switched off. Remove plug from
mains before maintenance or if cord
is damaged.
Wait until all machine components
have completely stopped before
touching them. The blades continue
to rotate after the machine is
switched off, a rotating blade can
cause injury.
Do not use the machine in the rain
or leaveit outdoors when it is raining.
Beware electric shock hazard.
Keep supply flexible cord away from
cutting means.
OPERATION
■
Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations may
restrict the age of the operator. When not in use store
the machine out of reach of children.
■
This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with the
appliance.
IMPORTANT
READ CAREFULLY BEFORE USE.
KEEP FOR FUTURE REFERENCE.
Safe operating practices for electrically powered
lawnmowers
TRAINING
■
Read the instructions carefully. Be familiar with the
controls and the correct use of the machine.
■
Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of the operator.
■ Never operate the machine while people, especially
children, or pets are nearby.
■ Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their proterty.
PREPARATION
■
While operating the machine always wear substantial
footwear and long trousers. Do not operate the
machine when barefoot or wearing open sandals.
Avoid wearing clothing that is loose fitting or that has
hanging cords or ties.
■
Thoroughly inspect the area where the machine is to
be used and remove all objects which can be thrown
by the machine.
■ Before using, always visually inspect to see that the
blade, blade bolt and the blade assembly are not worn
or damaged. Replace worn or damaged components
in sets to preserve balance. Replace damaged or
unreadable labels.
■
Before use check the supply and extension cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do not
use the machine if the cord is damaged or worn.
STOP
■
■
■
■ Walk, never run.
■ Mow across the face of slopes, never up and down.
■
■
■
■
grass, and when transporting the machine to and from
■
or shields, or without safety devices, for example
deflectors and/or grass collector, in place.
■
■ Do not tilt the machine when switching on the motor,
this case, do not tilt it more than absolutely necessary
and lift only the part, which is away from the operator.
■
■
Keep clear of the discharge opening at all times.
■
■ Stop the machine, and remove plug from the socket.
● whenever you leave the machine,
● before clearing blockages or unclogging chute,
● before checking, cleaning or working on the
machine,
●
● inspect for damage,
● replace or repair any damaged parts,
●
■ Keep all nuts, bolts and screws tight to be sure the
■
■ On machines with multi blade, take care as rotating
■
■
■ When servicing the blades be aware that, even though
the power source is switched off, the blades can still
■
■
■
■
no earth connection. The operating voltage is 220-240V
AC, 50 Hz. Only use approved extension cables.
Extension cords/leads should only be used if they comply
with H05VV-F, H05RN-F types or IEC type design (60227
IEC 53, 60245 IEC 57).
product, only the following cable dimensions should be
●
●
Extension cable, plug and socket must be of watertight
